Isolate the water at the stop valve. Flush the toilet, holding the handle down for a long flush, and sponge out the tank. Unthread the coupling nut for the water supply below the tank. Remove any remaining water out of the tank and bowl. If you have any worries it is a good idea to call a professional such as Chislehurst Plumbers can do the job for you and fit a new model if you find it too difficult. Grip each tank bolt nut with a box wrench or pliers and loosen it as you stabilize each tank bolt from inside the tank with a large slotted screwdriver. If the nuts are stuck, apply penetrating oil to the nut and let it sit before trying to remove them again. You may also cut the tank bolts between the tank and the bowl with an open-ended hacksaw. Remove and discard the tank. Remove the nuts that hold the bowl to the floor.First, pry off the bolt covers with a screwdriver. Use a socket wrench, locking pliers, or your channel-type pliers (all tools carried by an Chislehurst Plumber ) to loosen the nuts on the tank bolts. Use penetrating oil if the nuts are stuck, then take them off. Cut the bolts off with a hacksaw by first cutting down through one side of the nut if you cant remove them. Tilt the toilet bowl over and remove it. Grip each tank bolt nut with a box wrench or pliers and loosen it as you stabilize each tank bolt from inside the tank with a large slotted screwdriver. If the nuts are stuck, apply penetrating oil to the nut and let it sit before trying to remove them again. You may also cut the tank bolts between the tank and the bowl with an open-ended hacksaw. Remove and discard the tank.

Comments 0

Leave a Comment